11:32 am - Monday May 28, 2012

Soil Pollution

Soil pollution comprises the pollution of soils with materials, mostly chemicals, that are out of place or are present at concentrations higher than normal which may have adverse effects on humans or other organisms. It is difficult to define soil pollution exactly because different opinions exist on how to characterize a pollutant; while some consider the use of pesticides acceptable if their effect does not exceed the intended result, others do not consider any use of pesticides or even chemical fertilizers acceptable. However, soil pollution is also caused by means other than the direct addition of xenobiotic (man-made) chemicals such as agricultural runoff waters, industrial waste materials, acidic precipitates, and radioactive fallout.

Both organic (those that contain carbon) and inorganic (those that don’t) contaminants are important in soil. The most prominent chemical groups of organic contaminants are fuel hydrocarbons, polynuclear aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), chlorinated aromatic compounds, detergents, and pesticides. Inorganic species include nitrates, phosphates, and heavy metals such as cadmium, chromium and lead; inorganic acids; and radionuclides (radioactive substances). Among the sources of these contaminants are agricultural runoffs, acidic precipitates, industrial waste materials, and radioactive fallout.

soil pollution

Effects of Soil Pollution

Effects occur to agricultural lands which have certain types of soil contamination. Contaminants typically alter plant metabolism, most commonly to reduce crop yields. This has a secondary effect upon soil conservation, since the languishing crops cannot shield the Earth’s soil mantle from erosion phenomena. Some of these chemical contaminants have long half-lives and in other cases derivative chemicals are formed from decay of primary soil contaminants.

Causes of Soil Pollution

This type of contamination or pollution typically arises from failure due to corrosion of underground storage tanks or of the piping associated with them, historical disposal of coal ash, application of pesticides, percolation of contaminated surface water to subsurface strata, oil and fuel dumping, leaching of wastes from landfills or direct discharge of industrial wastes to the soil. The most common chemicals involved are petroleum hydrocarbons, solvents, lead, pesticides, and other heavy metals. This occurrence of this phenomenon is correlated with the degree of industrialization and intensities of chemical usage.

Sources of Soil Pollution

The most popular sources of soil pollution:

  • excavation works;
  • garbage cover;
  • the mixture with hydrocarbons, ammonia (air substances) ;
  • radioactive materials;
  • industrial residues;
  • erosion and landslides;
  • by acidification;
  • with water excess;
  • excess of nutrients;
  • by mixing with pesticides;

Main industries that pollute the soil are: the energy industry, metallurgical industry, machine construction industry, chemical and petrochemical industry, food industry, pulp and paper industry, agriculture industry.

Solution of Soil Pollution

Numerous attempts are being made to decontaminate polluted soils, including an array of both in situ (on-site, in the soil) and off-site (removal of contaminated soil for treatment) techniques. None of these is ideal for remediating contaminated soils, and often, more than one of the techniques may be necessary to optimize the cleanup effort. The most common decontamination method for polluted soils is to remove the soil and deposit it in landfills or to incinerate it. These methods, however, often exchange one problem for another: land filling merely confines the polluted soil while doing little to decontaminate it, and incineration removes toxic organic chemicals from the soil, but subsequently releases them into the air, in the process causing air pollution. For the removal and recovery of heavy metals various soil washing techniques have been developed including physical methods, such as attrition scrubbing and wet-screening, and chemical methods consisting of treatments with organic and inorganic acids, bases, salts and chelating agents. For example, chemicals used to extract radionuclides and toxic metals include hydrochloric, nitric, phosphoric and citric acids, sodium carbonate and sodium hydroxide and the chelating agents EDTA and DTPA. The problem with these methods, however, is again that they generate secondary waste products that may require additional hazardous waste treatments.

In contrast to the previously described methods, in situ methods are used directly at the contamination site. In this case, soil does not need to be excavated, and therefore the chance of causing further environmental harm is minimized. In situ biodegradation involves the enhancement of naturally occurring microorganisms by artificially stimulating their numbers and activity. The microorganisms then assist in degrading the soil contaminants. A number of environmental, chemical, and management factors affect the biodegradation of soil pollutants, including moisture content, pH, temperature, the microbial community that is present, and the availability of nutrients. Biodegradation is facilitated by aerobic soil conditions and soil pH in the neutral range (between pH 5.5 to 8.0), with an optimum reading occurring at approximately pH 7, and a temperature in the range of 20 to 30°C. These physical parameters can be influenced, thereby promoting the microorganisms’ ability to degrade chemical contaminants. Of all the decontamination methods bioremediation appears to be the least damaging and most environmentally acceptable technique.

Be Sociable, Share!
<-- Google Analytics Start --> <-- Google Analytics End--> <-- Infolinks Start--> <-- Infolinks End-->